Connect 2 Macs With Ethernet Crossover Cable

Jun 01, 2012  I have a crossover cable and I need to connect my imac to my macbook so I can download some of my files on my macbook to my new imac. I know I have to go to Preferences Networks and change the ethernet settings but I'm not sure what to do. Dec 02, 2007  Absolutely. Connect the two computers with an Ethernet cable (it doesn't have to be a crossover cable) or a router. Then, to share the iBook's Internet connection, go to System Preferences Sharing and turn on Internet sharing. However, if you can't get the MacBook to join your network, please contact Apple's technical support to find out why. Connect Two Computers with an Ethernet Cable. There are two options - you can either buy a router or, if you are looking for something more simple and don’t want to spend money on new networking hardware, you can connect the two computers using a commonly-available cable.

  1. Connect 2 Macs With Ethernet Crossover Cable Configuration

Two Macs can be connected through a wired or wireless network in order to share files and printers. What are the benefits of wired networks for your Macs? Why might you want to go wireless? Here, you’ll examine the ins and outs of wired versus wireless technology for networking Mac computers, and why you might want to use one or the other, or perhaps a combination of both.

The benefits and creation of wired networks for Macs

If the Macs you intend to network are almost always going to stay put in one location, the wired approach is arguably the best way to proceed. Wired networks are zippier, much more secure, not as prone to interference, typically less expensive, and arguably the easiest to set up, unless dealing with a mess of wires becomes, well, a real mess.

You’ll use Ethernet cables to connect your Macs if you go the wired way. Then ends of an Ethernet cable look like an oversized phone plug. Such cables also go by the names CAT-5, CAT-5e, or CAT 6. You may also see terms such as 10BaseT or 100BaseT, which denote networks that use the aforementioned cables. And Intel-era Macs employ blistering fast Gigabit Ethernet connections.

To get started with a wired network, plug one end of the cable into the Ethernet port included in any modern Mac that has the connector. (Otherwise you must rely on an optional USB Ethernet dongle accessory.) The other end typically plugs in to an inexpensive network hub, switch, or router, which in turn is connected to the box feeding your Internet connection, usually a broadband cable modem or DSL.

Although technical distinctions exist between hubs, switches, and routers, you don’t need to bother with learning them. But it is helpful to know that routers contain multiple jacks, or ports, for connecting each Mac (or other computer) or printer that becomes part of your network (and routers usually contain built-in hubs).

The benefits and creation of wireless networks for Macs

Certain benefits of technology are so obvious that they practically explain themselves. Wireless is one of those liberating technologies. By eliminating cables, you can

  • Wander around with a laptop and still hold on to a connection.

    I wrote very fast and I was confused:(My question is about the pitch, pitch bend is correctly map with two buttons, when i use SSL in internal mode i can use the keyboard to up and down the pitch with 'E' and 'R' keys, and pitch bend with 'T' and 'Y' keys in deck A for example, true?it would be nice if you could do the same with a controler like X1, two buttons to up and down the pitch (not only with a slider), and other two buttons to the pitch bend but the pitch (not pitch bend) only can be mapping with a slider, isn´t it?I hope I explained correctly, my english is very limited. Zach,I'm not sure this answered the question. The slider is essentially a coarse pitch control (unless you hold Shift while moving it) whereas the Shift- E/R or Shift - D/F keyboard shortcuts are fine-pitch adjustment, which allows adjustments of a hundredth of a percent (very precise). /midi-temp-slider-scratch-live.html. I have the very same question because I do all my dj'ing with Serato in internal mode. So, how do we MIDI map this fine up or down pitch adjustment to buttons on a MIDI controller?Sadly, on earlier version os Serato the fine pitch adjustments were buttons on the screen.

  • Drastically reduce the tangle of cables and cords, so the area behind your desk won’t be nearly as untidy.

  • Easily add on to the network later, without worrying about connecting cables.

  • Access other wireless networks outside your home or office, through public or private hotspots (found in numerous coffeehouses, airports, libraries, parks, and elsewhere). Accessing these hotspots may or may not be free.

Wireless networks however, are not as fast as wired networks, are less secure, and may be a bit finky to setup. You have several choices for creating a wireless network for Macs:

  • All the Macs introduced during the last several years are capable of exploiting wireless networking through radio technology that Apple brands as AirPort. Most of the computing world, including Apple, refers to the core technology as Wi-Fi. Older Macs may require an AirPort Extreme card to use this technology.

    The AirPort Extreme has five ports, including a single Gigabit Ethernet WAN port, three Gigabit Ethernet LAN ports, and a single USB 2.0 port for a USB printer or external hard drive.

    Although Apple would love to sell you an AirPort base station, wireless-capable Macs can also tap in to routers produced by the likes of Belkin, D-Link, Linksys (or parent company Cisco), and Netgear, even if you previously set those up to work with a Windows network. Windows machines can also take advantage of an AirPort base station.

  • The AirPort Express is a portable hub with four ports: two Ethernet plugs (WAN and LAN), USB, and an analog/optical audio minijack.

    May 29, 2019  Connecting to a Mac from a Windows PC. Connecting to a Mac from a Windows PC is a little different. You’re not going to be able to use Remote Desktop, but that’s okay because there’s a free client called RealVNC viewer that does the trick nicely. Just like with Windows, you first have to set up your Mac for screen sharing. Aug 03, 2018  How to use TeamViewer 2020 (Remote control for PC or Mac) - Duration: 10:37. Hector Garcia CPA 7,788 views. How to Share files between a Mac and PC in 5 easy steps - Duration: 6:59. Previous TeamViewer versions 10 – 11 – 12 – 13 – 14. The downloads on this page are only recommended for users with older licenses that may not be used with. TeamViewer 9 for Windows. TeamViewer 9 is a software supporting remote computer access was developed for the purpose of connecting the computers together, remote control helps users to easily install, as well as assistance to install software remotely on computer, support a friend or the computer user is not present. Teamviewer mac vers pc.

    If you connect AirPort Express to your home stereo receiver or powered speakers through the aforementioned audio minijack, you can pump the music from your Mac (or Windows) iTunes library through your stereo system. You can use either a ministereo-to-RCA cable or a minidigital, fiber-optic TOSLINK cable, if your stereo can accommodate that kind of connector. Apple refers to this wireless symphony as AirPlay.

    AirPlay can be used to not only wirelessly stream music, but also audio-visuals, and even TV, through a technology called AirPlay Mirroring.

Related articles:

Load more

All recent Macs have an Ethernet port, as do many PCs and many printers and other devices, including the Apple TV. All you need to connect two such computers is an Ethernet cable, which is inexpensive. With two devices connected via an Ethernet cable, you can create a local network that lets you transfer files easily.

Many offices have Ethernet jacks in the walls, allowing you to plug in to the corporate network. Check with your IT staff before you do.

For the most part, Ethernet just works. If you need to configure its settings, follow these steps:

1Select System Preferences from the Apple menu and click the Network icon.

You see this window.

2Select Built-in Ethernet from the sidebar.

The pane you see tells you your Mac’s IP address and the IP address of your router, assuming that it sees it. Write down your router’s IP address; you need it if you want to configure the router.


3Click the Advanced button.

Connect 2 Macs With Ethernet Crossover Cable Configuration

You see a pane with a row of buttons labeled TCP/IP, DNS, WINS, AppleTalk, 802.1X, Proxies, and Ethernet. If you’re not a networking guru, don’t mess with any of them unless someone instructs you to do so.