• Keyboard Shortcuts Mac

The TRAKTOR PRO keyboard stickers are compatible with all default shortcuts in all versions of TRAKTOR PRO. Therefore, by applying them on your standard keyboard you immediately start editing with TRAKTOR PRO. TRAKTOR PRO keyboard stickers are designed to improve your productivity and to enjoy your work all the way through. May 26, 2014 Traktor Keyboard Shortcuts. Traktor keyboard shortcuts can be extremely helpful in reducing the time it takes to perform a specific action, or to use as your main form of DJ control. When starting out using Traktor for the first time, using the keyboard as your main control method is the cheapest and most practical way to DJ right off the bat. Then again, you may look into setting your Keyboard mapping to: Auto X-Fade Left (your key A) Auto X-Fade Right (your key B) And adjust the Crossfader parameters to your liking in the Mixer Preferences. Either one might work.

Learn how to map Triple-Macro Hotkeys with Traktor. In this video Native Instruments DJ Product Specialist and Dubspot Instructor DJ Endo takes you through the steps on how to customize your keyboard mapping and map multiple commands to a single key. Endo demonstrates this by creating a MIDI/HotKey command (map/Mapping Triple Micro HotKey) which allows you to “do three things in one action,” just by pushing a key! This enables you to jump to the first cue point, play and enable sync all with a single key press.

Here is a handy Trick you can do in Traktor Pro that will save you a lot of time mixing in your tracks. It is called a Cue / Play / Sync button. This command is called a “Triple Macro” and will perform 3 actions at the same time with one click of a button. Setting double and triple macros will increase your workflow dramatically since you are saving 2-3 steps with one click of a button.

The following trick is a one button solution to beatmatching and DJ mixing.

This command works best when you have correct beatgrids set for your tracks, with all of your beatgrid markers mapped to Cue Point slot 1 in Traktor Pro (in the Cue section).

Before I explain how to set this command, here is the reasoning behind why I use this magic button in my DJ sets.

Keyboard Shortcuts Mac

When mixing with Vinyl or CDJs, before you can mix your next song in, you have to first find the first beat (Cue) or “the one” of your track. Then you have to play the track, and then adjust the tempo and nudge the track forwards and backwards and change the pitch (tempo) until both tracks are in phase (beats are synchronized) with each other, and then you have to keep the two tracks beatmatched (sync’d) manually until the mix is over. With todays technology, why not just take these 3-4 steps and make them into one step?

When setting this keyboard shortcut or midi command you can perform all three of these actions with one click of a button, and save all the time you would spend cuing the track up, playing the track and manually syncing the track, saving you minutes in each mix. This trick is great for any DJ who plays using MIDI controllers or Hotkeys to DJ in Traktor.

To program this command to a MIDI Note or Keyboard shortcut:

1) Open Traktor’s preferences
2) Go to the controller manager

3) Select the device “generic keyboard” or choose your MIDI device.

We are now going to make our three commands

PLAY

1) Click on the “Add In” button
2) Select “Transport” / “Play Pause.”

3) Click on the “Learn” button
4) Push the button or key that you want to assign as your “Cue / Play / Sync” button. You should then see a MIDI note or keyboard letter appear in the box next to learn.
5) Select the deck you want to assign this to (I always choose “Device Target” so whatever deck is highlighted is the one I’ll be playing
6) Set your interaction mode to “Direct”
7) Change the “set to value” field to “1″ (1 this means ON where 0 means OFF). * note – You might have to change the interaction mode to “0″ and then back to “1″. Its a small bug in older versions of Traktor.*
8) The “Type of Controller” field will be “Button”

Download virtual dj for pc now. SYNC

1) Click on the “Add In” button
2) Select “Tempo” / “Sync”

3) Click on the “Learn” button
4) Push the button or key that you want to assign as your “Cue / Play / Sync” button. You should then see a MIDI note or keyboard letter appear in the box next to learn.
5) Change the Assignment to “Device Target”
6) Set your interaction mode to “Direct”
7) Change the “Set To Value” field to “1″. * note – You might have to change the interaction mode to “0″ and then back to “1″. Its a small bug in older versions of Traktor.*
8) The “Type of Controller” field will be “Button”

CUE

1) Click on the “Add In” button
2) Select “Cue / Loops”
3) Click on “Select / Set + Store Hotcue”

4) Click on the “Learn” button
5) Push the button or key that you want to assign as your “Cue / Play / Sync” button. You should then see a MIDI note or keyboard letter appear in the box next to Learn.
7) Change the Assignment to “Device Target”
8) Set your interaction mode to “Hold”
9) Set your “Set To Value” field to “Hotcue 1″

You will notice that all three of the commands you just programmed will be highlighted. This means that the same button is doing three separate things at once.

Once you are done programming, press play a track in Deck A, then load a track into Deck B
Click on the deck header in Deck B so the deck is highlighted
Click on your “Magic Button” (whatever button you chose) and you will be in the mix!
You will notice that the PLAY button is ON, the SYNC button is ON, and the track jumps to CUE POINT 1 when you press the button.

Usually when I’m DJing with strictly controllers, I will just leave sync on the whole set, and click my “Magic Button” on “the one” for each mix. Since all my load markers are mapped to cue point 1 and all my Beatgrids are done perfectly I know that when I hit the “Magic Button” all of my beatmatching is done and my mix will be phrased correctly (on the 1), so I can now focus on more creative things such as beatjumps, loops and effects.

If you do not know how to do beatgrids correctly, here is a video I did on how to do perfect beatgrids.

Here is an older video that Richie Hawtin did on how to set Double Macros

http://www.youtube.com/watch?v=TTGwg6Kz0y8

Happy Mixing!

- DJ Endo

+

Was this helpful to you? Do you have questions? Leave us a comment below! DJ Endo is a DJ and product specialist for Native Instruments and lives in Brooklyn. Listen to mixes from him at www.djendo.com.